Products of Ag+, Cu+ and Cu2+ Ion Implantation in the Surface of Polycrystalline Cadmium Sulfide as Photocatalysts for the Oxidation–Reduction Reaction of Methylene Blue with Formaldehyde

Semiconductor–semiconductor and molecule (molecular ion)–semiconductor products are formed upon the implantation of Ag⁺, Cu⁺, and Cu²⁺ ions in the CdS surface. Possible mechanisms were examined for their photocatalytic action in the reduction of methylene blue.     

交联聚异丁烯酸甲酯型负载树脂的孔结构与分离稀土性能的关系

本文报导异丁烯酸甲酯型负载树脂的交联度、致孔剂组成和含量对负载树脂孔结构的影响.结果指出,良溶剂和劣溶剂按一定比例混合作为致孔剂,可制备不同孔结构的树脂.致孔剂量增加,树脂表观比重减小,而比表面积、孔体积与平均孔径均增加.交联度从10％增加到35%,表观比重和比表面积增加,而孔体积与平均孔径减小.增加致孔剂所含良溶剂的比例,树脂的表观比重、比表面积增加,而孔体积与平均孔径减小.已制备一系列不同孔结构的2-乙己基膦酸单2-乙己基酯(P507)负载树脂,比较了它们分离La、Ce、Pr、Nd的性能.结果表明,适当孔结构的负载树脂用于萃取色层分离稀土元素具有优良的分离性能.     

Melamine cyanurate-microencapsulated red phosphorus flame retardant unreinforced and glass fiber reinforced polyamide 66

A novel microencapsulated red phosphorus (RP) was prepared through the molecular self-assembly of melamine cyanurate (MCA). Compared with the conventional encapsulated RP, MCA-encapsulated RP (MERP) shows simpler and more environment-friendly preparation process higher thermal stability and lower moisture absorption. With MERP filled in unreinforced polyamide 66 (PA66) and glass fiber (GF) reinforced PA66, flame retardant materials with satisfactory flame retardancy and mechanical performance can be obtained. The influence of the MCA/RP ratio on the flame retardancy as well as the condensed phase of MERP flame retardant PA66 was investigated to reveal the nitrogen-phosphorus (N-P) synergistic flame retarding effects between MCA and RP.     

液相色谱串联质谱法(LC-MS/MS)分析宠物食品中三聚氰胺

三聚氰胺(melamine)为白色或无色结晶,通常用于塑料制品中合成树脂的生产中,高温和酸性条件下能引起三聚氰胺转移到食品中.三嗪类农药环丙氨嗪(cyromazine)在极端的pH条件下或者光降解的条件下也能生成三聚氰胺.     

用亚硝基R盐螯合树脂分离富集催化极谱法测定矿石中的铱

本文研究了利用亚硝基Ｒ盐螯合形成的树脂，分离富集试液中痕量贵金属元素铱的实验条件。并利用ＪＰ－１型示波极谱仪，在１．５０ｍｏｌ／Ｌ盐酸＋５．０×１０＾－５ｍｏｌ／Ｌ硫脲＋０．２ｍｏｌ／Ｌ盐酸＋５．０×１０＾－５ｍｏｌ／Ｌ硫脲＋０．２ｍｏｌ／Ｌ碘化钾＋碲（ρ（Ｂ）＝０．４ｍｇ／Ｌ）的混合底液中，对铱进行极谱催化波测定。在示波极谱仪上峰电位约－０．５５Ｖ（银汞齐为参比电极），可测定试液中５．０×１．０     

用新型AP树脂分离铑—铱和同时富集测定铑`铱`铂`钯

铑-铱分离-向被认为是最困难的课题之一,即使文献曾报道Rh-Ir的分离,但实际Rh并未与萃取剂或吸附剂反应,而是与非贵金属离子一同留在溶液中。我们曾用光谱半定量方法研究了AP树脂对Rh、Ir的吸附行为,结果是Rh不被吸附而Ir能被吸附。本文通过改变Rh的离子状态,使之能被AP树脂吸附完全,而与留在溶液中的非贵金属分离,然后在柱上用不同淋洗液再使Rh-Ir分离。     

SYNTHESIS, STRUCTURE AND PROPERTIES OF INTERPENETRATING SULFONIC ACID RESINS WITH HIGH CAPACITY

Two series of interpenetrating sulfonic acid resins (ISAR), 10×n and n×10, were prepared by means of the wet method, and the physicochemical, thermodynamic and kinetic properties of the ISAR were measured. The results show: 10×n resins exhibit better properties than n×10 ones, mainly in higher apparent degree of crosslinking and larger conformational entropy effect, among which, 10×1 resin exhibits the best thermodynamic and kinetic properties. In the DTA graphs of n×10 resins, there are two T_g and two T_(ox), but in those of 10×n, only one T_g and one T_(ox). This result well supports the conclusion that 10×n resins have much better interpenetrating structural aspects.     

6-氨基青霉烷酸在弱碱性阴离子树脂IRA67上的吸附研究

用静态法研究了6-氨基青霉烷酸在弱碱性阴离子交换树脂IRA67上的吸附行为．在溶液pH为8．0，6-APA起始浓度介子3.00mg／m1-20．00mg／ml条件下，测定了25℃时IRA67树脂的静态交换动力学曲线、吸附等温线，并求得了IRA67树脂的平衡速率常数及吸附等温线方程．分别用Langmuir型和Frendlich型方程对IRA67树脂吸附等温线进行线性回归拟合，结果表明，6-APA在IRA67树脂上的吸附更符合Langmuir型吸附．     

MICRO-PHASE SAEPARATION IN EPOXY RESIN WATERBORNE PARTICLES DURING CURING PROCESS

Sub-micron sized phenolic epoxy resin waterborne particles were prepared by phase inversion emulsification. Micro-phase separation occurred during the curing process at high temperature. The as-prepared samples possessed one glass transition temperature （Tg） and two exothermal processes during DSC heating scannings. After being thermally treated above the exothermal peak temperature, they possessed two glass transition temperatures with the disappearance of exothermal peaks, whilst a core/shell structure was formed. This was likely related with the outward diffusion of reactive oligomers to the outer layer of particles.     

聚氧硫杂蒽树脂固化特性及其动力学的研究

以DSC、TG等技术手段研究了聚氧硫杂蒽树脂 (POSPF)的固化特性及其动力学 .结果表明 ,用六次甲基四胺 间二氯苄作固化剂 ,加热至 10 5～ 2 2 5℃能使POSPF树脂固化 ,在固化过程树脂中的活性羟甲基和固化剂参与反应生成亚甲基桥从而形成网状体型结构 ;动态DSC曲线上出现宽的固化放热峰 ,用T β外推法确定其凝胶温度Ti=10 0 0℃、固化温度Tp=181 5℃、后固化温度Tf=2 2 5 7℃ .固化后树脂具有优良的耐热性 ,失重 5 %时热分解温度高达 4 0 3℃ .